008615129504491
| Mea Hana | ʻO Ti-6Al-4V ELI; Gr23; Gr5 |
| Kūlana Maʻamau | ASTM F136, IS05832-3 |
| Ka nui | (1.2~20) T * (300~500) W * (1000~1200) L mm |
| Ka hoʻomanawanui mānoanoa | 0.08-0.8mm |
| Moku'āina | M, Hoʻopaʻa ʻia |
| ʻIli | Hoʻopili ʻia a i ʻole i hoʻomoʻa ʻia |
| ʻOʻoleʻa | Ra≤3.2um (i hoʻopili ʻia) |
1. Me ka palapala hōʻoia hoʻāʻo wili, e ʻae i ka hoʻāʻo ʻaoʻao ʻekolu.
2. 100% ʻike ʻana i nā kīnā ultrasonic a turbine paha e hoʻopau i nā kīnā metallurgical a me nā haumia non-ferrous.
3. ʻAno: Nā waiwai kino paʻa, ʻoi aku ka maikaʻi o ke ʻano metallographic ma mua o nā koi maʻamau, hiki ke hoʻopilikino ʻia ka ikaika kiʻekiʻe a i ʻole ka plasticity kiʻekiʻe.
| Nā haku mele kemika | ||||||||
| Papa | Ti | Al | V | ʻO Fe, ka nui loa | C, ka nui loa | N, ka nui loa | H, ka nui loa | O, ka nui loa |
| Ti-6Al-4V ELI/Gr23 | Bal | 5.5~6.5 | 3.5~4.5 | 0.25 | 0.08 | 0.05 | 0.012 | 0.13 |
| Gr5 | Bal | 5.5~6.5 | 3.5~4.5 | 0.30 | 0.08 | 0.05 | 0.015 | 0.20 |
| Nā waiwai mīkini | ||||
| Papa | Ikaika Tensile (Rm/Mpa) ≥ | Ikaika Hua (Rp0.2/Mpa) ≥ | Hoʻolōʻihi (A%) ≥ | Ka Hoʻemi ʻana o ka ʻĀpana (Z%) ≥ |
| Ti-6Al-4V ELI/Gr23 | 860 | 795 | 10 | 25 |
| Gr5 | 860 | 795 | 8 | 20 |
Hana ʻo XINNUO i ka papa titanium lapaʻau me ka 650 Rolling Mill, e kāohi maikaʻi i ka hoʻomanawanui mānoanoa, ka pololei a me ka microstructure. ʻO kā mākou hana makahiki o ka papa titanium lapaʻau he 300 tons. E hōʻailona ana i ka helu wela, ka papa, ka nui a me ke kuhikuhi ʻōwili ma nā pepa.
He loea mākou i ka hana ʻana i ka papa titanium lapaʻau. He haʻahaʻa ka nui o ka mea ASTM F136 akā he kiʻekiʻe nā waiwai maikaʻi, hoʻohana nui ʻia no ka papa iwi poʻo, ka papa hoʻopaʻa iwi kūloko a me nā lako lapaʻau. Lawe mākou i ka maikaʻi ma ke ʻano he mea nui mua i ka wā o ka hana ʻana a me ke kaʻina hana maikaʻi.
I kēia manawa, ua lilo mākou i hoʻokahi o nā mea hoʻolako ʻekolu kiʻekiʻe o nā koʻokoʻo/koʻokoʻo titanium lapaʻau i nā mea hana implant titanium Kina. Ua hōʻoia ʻia ʻo XINNO ʻo ISO 13485:2016 a me ISO 9001:2015.
